Hi!

Welcome to DIY Darling! I'm a twenty-something figuring out how to design my dream life on a dime. Let's take this journey together!

DIY Haunted House Sign

DIY Haunted House Sign

Happy Halloween darlings! What better way to get in the spooky spirit than a DIY Haunted House Sign? The best part? It’s all made from materials you probably already have lying around the house.

Materials:

  • Wood scraps (you’ll need a 2x2 and a 2x8)

  • Jigsaw

  • Sandpaper

  • Craft paint (black)

  • Fine paint brush

  • Pencil

  • Rubber mallet

  • Hammer + nails

Disclosure: My content is reader-supported, which means that when you purchase through links on my site, I may earn an affiliate commission. Learn more here.

cutting wood with jigsaw
cutting wood piece with jigsaw

Cut wood to size using a jigsaw. I cut the bottom of the 2x2 into a pointed stake so that I could drive it into the ground easier. I didn’t worry too much about measurements or precision, as I felt the sign needed to look more homemade to look more creepy.

distressing wood for Halloween sign
distressing wood for Halloween sign

Distress the wood using a blade, sandpaper, and soot (I achieved this by lighting a scrap piece of wood on fire and rubbing the blackened end on the wood. Have fun with it and get messy - it could be a violent spirit haunting your house!!

tracing letters on Halloween sign
painting black lettering on Halloween sign

Using a pencil, trace out HAUNTED onto the wood. I practiced on a piece of paper first to get the lettering and spacing right. At the top of the wood, I added “this house is” and smeared the black paint to look like it was melting. I used black craft paint and a fine point paint brush to fill in all the letters. It dried quite quickly! Additionally, I painted the raw edges of the wood sign in black.

ghost and wood sign for Halloween decor
installing Haunted House sign for Halloween decoration

Use a rubber mallet to pound the stake into the ground. Highly recommend doing this before the first frost of the season while the ground is still soft. Once the stake is secure, nail the sign into the front using a hammer and two nails.

ghost and haunted house sign on lawn

And just like that, your DIY Haunted House Sign is complete and ready for Halloween. I love how it looks with my spooky ghost and creepy cloth decorations! Just goes to show you don’t need to spend a lot to deck out your house for the holidays.

Hope you have a Happy Halloween and stay safe out there!

To learn how I made Sir Charles the ghost and other DIYs for Halloween, check out the Amazon Live I did earlier this month with Tastemade!

Travel-Themed Nursery

Travel-Themed Nursery

Creating a Gallery Wall Around a TV

Creating a Gallery Wall Around a TV